Category: Networking

Azure Stack Development Kit – Connecting to subscription networks

When you have Azure Stack Development Kit deployed and in Routing mode (see earlier post). You can now also create S2S VPN connections to the tenants deployed inside Azure Stack. In my configuration I used BGP for the BGPNAT to advertise the newly assigned “external” IP addresses to my Juniper so that I don’t have […]

Read more

Azure Stack Development Kit – BGP

Now that we have our Azure Stack Development Kit in routing mode, we can also send the BGP information from within the Stack to the Juniper Firewalls (or any FW you have..). This will ensure that the new “external IP addresses” that are assigned to our workloads are accessible via our intranet route information and […]

Read more

Azure Stack Development Kit – Routing Mode (removing NAT)

When you install Azure Stack Development Kit it is a completely isolated service with multiple networks. It means that your Azure Services (such as ADFS, the portal and AD) are not available outside of the box at all. But what if you wanted to use the Azure Stack DK from multiple computers?  or in our […]

Read more

Checkpoint with Azure VPN (new version)

These are my notes on the newer Checkpoint VPN stuff.. but still working on actually testing them.. – I put a 2016 date on it to remove it from the main page.. Seems the MSS clamping on Azure VPN’s needs to be 1350, my PPPOE adapter needed to be 1492 for du Connections. Note: MTU […]

Read more

Azure Networking S2S + P2S

In a previous post we looked at the ability of creating a Site-2-Site connection from Checkpoint to Azure using a Dynamic Gateway. In this post, we look at client-dialup (VPN) into the Azure network and establish routing between all the sites involved.

Read more